Skip to main site

KAVACH.

Fire safety has looked the same for sixty years.

Loading the assembly · 0%

KavachHalo

A certified fire extinguisher behind a cover made to your specification. Made to order, one at a time, for houses where nothing is chosen by accident.

Scroll to take the cover off

KavachHalo

Specified, not bought off a shelf. Price on request.

KAVACH · Hyderabad, India Part one of two — catalogue continues below

The one thing in the room nobody let you choose.

You chose the stone, the lights and the switch plates. Then a red cylinder arrived and undid a corner of the room. KAVACH HALO is a fire extinguisher behind a slim shield, made to stay on your wall in the open, where it can be reached in time.

Pre-order onlyUnits are allotted in the order pre-orders are confirmed.
Two sizesP21 for flats. P34 for houses and larger spaces.
₹50,000 advanceInclusive of GST. Books your unit and production slot.
Pre-order now Configure yours
KAVACH HALO on the patterned wall of a bakery café
On the wall, in the open: KAVACH HALO in a café.
Why this exists

Fire safety has looked the same since 1965.

Not because the engineering demanded it, but because nobody who cared how a room looks was ever asked.

The red cylinder

  • Stands on the floor or juts off a bracket into the walkway
  • Gets hidden in a cupboard, then can't be found in a fire
  • Pin, seal and trigger exposed for children to fiddle with
  • Leaves you face to face with the heat
  • Needs two hands

KAVACH HALO

  • Only 91 mm deep, sits close to the wall
  • Looks good enough to stay in the open, where you can reach it
  • Pin, seal, valve and hose concealed behind the shield
  • The shield protects you from radiant heat and falling debris while you fight the fire
  • Operated with one hand
Specifications

The numbers.

P21P34
Best forFlats, smaller spacesHouses, larger areas
Extinguishing agentABC powder, 4 kgABC powder, 6 kg
Fire rating21A, 113B, C34A, 183B, C
Discharge time14.1 ± 2.1 s19.6 ± 2.9 s
Full weight~11.4 kg~13.2 kg
DimensionsØ 630 ± 2 mm · 91 ± 2 mm deep
Suitable forSolids, liquids, gases, live electrical up to 1,000 V (min. 1 m)
Both sizes
Container7.2 L alloy steel (P265GH), red powder coat RAL 3000
PropellantNitrogen (N₂)
ValveChrome-plated brass, M45 × 1.5
PressureWorking 15 bar · Max 17 bar · Test 25 bar
Operating temperature−30 °C to +60 °C
OperationSingle-handed; pin, seal, valve and hose behind the shield
Shield finishesST coloured (red, white, black) · EX self-extinguishing textile
MountingWall bracket
MaintenanceMonthly check · yearly service · 5-yearly pressure test
HSN8424 10 00 · GST invoice with every unit

Builders and architects: drawings, wall-bracket details and project pricing on request at info@kavachdrop.com

Read this before you buy

What KAVACH HALO will not do.

  • It won't replace your building's fire provision on its own.Use it alongside what NBC 2016 Part 4 requires for your building, and confirm quantities with your fire consultant.
  • It won't work on every fire.Rated for solids, flammable liquids, gases and live electrical equipment up to 1,000 V from at least 1 m away. Cooking-oil and deep-fat fires need a wet chemical extinguisher.
  • It won't help if it's hidden.HALO is designed to stay in the open. Behind a door, it's just an expensive cylinder.
  • It isn't zero maintenance.Check it monthly: in place, seal intact, gauge needle in the green. It needs a service check every year and a pressure test every 5 years.
  • The shield doesn't put the fire out.Textile (EX) shields are self-extinguishing, and the shield protects you from heat. The extinguisher behind it does the work.
  • It isn't a stock item.HALO is sold on pre-order only. We confirm your delivery date with your final price.

In any fire, people first. Get everyone out before you reach for anything.

In use

The shield is the only new part.

Behind it is a standard ABC powder extinguisher that works the way extinguishers always have.

KAVACH HALO on a floor stand in a modern home beside a glass staircase and wine wall
At home, in plain sight: KAVACH HALO beside the stairs.
1

Lift it off the wall

HALO sits on a wall bracket and lifts straight off. There's no strap to undo and no cupboard to open.

2

Hold it like a shield

Grip it from behind. The shield sits between you and the flames, guarding you from heat and debris.

3

Aim at the base and sweep

Release with one hand, aim at the base of the fire and sweep side to side. Anyone shown an extinguisher once can use it.

Try it yourself

Put the fire out.

Lift HALO off the wall, hold it up like a shield and aim at the base of each flame. Fifteen fires. Put them all out before the room catches fire.

Fires out 0/15
0.0s

Aim at the base. Don't let the room catch fire.

Pre-order ₹50,000

Just for fun. In a real fire, get everyone out first, and only tackle a small fire with your way out behind you.

Configure

Build the specification.

Choose the cover and we will write the line that goes into your schedule. Copy it, or send it to us and we will quote against it.

Preview of the configured KAVACH HALO shield

Cover material

Finish

Mounting

Your specification line

Ø and depth confirmed at quotation. Custom colours matched to any reference you supply.

Pre-order this HALO Copied
Pre-order

Reserve your HALO.

₹50,000pre-order advance, inclusive of GST

HALO is available on pre-order only. The advance books your unit and your production slot. Before production starts, we confirm the final price for your size and shield in writing, and your advance is adjusted against it.

  • Don't accept the final price? Cancel and get your full advance back.
  • Cancel any time before production starts for a full refund, within 7 working days to your original payment method.
  • GST invoice issued for the advance and the balance.
  • Sold by KAVACH SAFETECH LLP, Hyderabad.

Pre-order KAVACH HALO

No payment is taken here. We call you within 2 working days to confirm your shield, final price and delivery date, and share how to pay the ₹50,000 advance. Your details are used only for this order. Ordering 10 or more units? Bulk and institutional

The 3D models could not decode. The models are inlined in this file, so the usual cause is the Draco decoder being blocked. Check your internet connection.